How many tons of asphalt do I need?

Multiply the volume in cubic feet by ~145 lb/ft³, then divide by 2,000. A typical driveway runs 8–12 tons.

How thick should an asphalt driveway be?

2–3 inches of compacted asphalt over a solid base for residential driveways; 4+ inches for heavier vehicles.

How much does a ton of asphalt cover?

At 2 inches thick, one ton covers roughly 80 sq ft; at 3 inches, about 54 sq ft.

Asphalt Cost in Florida

Local 2026 pricing for Florida

Asphalt costs in Florida run roughly 1% below the national average. Florida's sandy subgrades often need extra base preparation before paving; prices sit near the national average, with heat affecting scheduling.

Your measurements

Length(ft)

Width(ft)

Thickness(in)

2–3 in for driveways, 4+ for heavy loads.

Density(lb/ft³)

Compacted hot-mix asphalt ≈ 145 lb/ft³.

Price per ton($/ton)

Enter your measurements

Fill in the fields to see your estimate.

Why Florida prices differ

Florida's sandy subgrades often need extra base preparation before paving; prices sit near the national average, with heat affecting scheduling.

Project size — larger driveway & paving jobs lower the cost per unit but raise the total.
Material grade — premium products cost more but often last longer.
Labor rates — local wages and demand swing installed prices significantly.
Region — prices vary by state and metro (see local cost pages below).

Estimates are guidance only — get quotes from local driveway & paving pros in Florida. See the national cost breakdown →